How this is calculated
Every line is either a rate multiplied by the roof size or a flat amount. Nothing is hidden and nothing is estimated for you.
L1 = area ÷ 100 (squares) L2 = L1 × materials per square L3 = L1 × labour per square L4 = L1 × tear-off per square L5 = permit L6 = other fixed costs L7 = L2 + L3 + L4 + L5 + L6 (subtotal) L8 = L7 × contingency ÷ 100 L9 = L7 + L8 (total)
Because materials, labour and tear-off are priced per square, they scale with the roof. The permit and other fixed costs do not, which is why a larger roof has a slightly lower cost per square.
Why there is no national price on this page
A published national average for a complete residential roof replacement would need a source that actually measures one. We could not find a source we were willing to present as authoritative, so the calculator does not claim a market price at all.
Instead, the four rates you see are labelled assumptions. They are there so the page has something to calculate with. Replace them with figures from a local quote and the arithmetic becomes a check on that quote.
Worked example
A 2,683 sq ft roof at the example rates: 26.83 squares. Materials 26.83 × $190 = $5,098. Labour 26.83 × $260 = $6,976. Tear-off 26.83 × $90 = $2,415. Permit $450 and other costs $300. The subtotal is $15,238. An 8% contingency adds $1,219, for a total of $16,457, or about $613 per square.
What a real quote should itemise
- Removal and disposal, including the dumpster and any fee for the old material.
- Decking: how much is being replaced, and at what rate per sheet.
- Underlayment, ice and water shield, drip edge, and their coverage.
- Field shingles, starter, hip and ridge caps, and the waste allowance.
- Ventilation, flashing and any penetration work.
- Permit, and who is pulling it.
- Labour, stated per square or as a total.
Assumptions and limitations
- Rates apply uniformly across the whole roof; a complex roof is not priced per plane.
- No allowance for structural repair, rotten decking beyond what the rates cover, or snow and ice removal.
- No allowance for a second storey, steep-slope charges or difficult access unless you fold them into the rates.
- Taxes are not included.
- The total is arithmetic from your inputs. It is not an appraisal and not a contract price.
Frequently asked questions
Is this a real price for my area?
No. It is your own numbers added up. The starting figures are example assumptions and are labelled as such on the page.
What is a roofing square?
100 sq ft of roof surface. Materials are usually quoted per square, which is why this calculator converts the area first.
Why does the cost per square change when I change the roof size?
Permit and other fixed costs are spread over more squares, or fewer, so the per-square figure moves while the rates stay the same.
Should tear-off be zero?
Only for a new roof over bare decking. A replacement that removes an existing covering has a real removal and disposal cost.