Two contractors look at the same roof and quote $11,000 and $19,000. Neither is necessarily dishonest. One price may include new decking, a ridge vent and a full tear-off. The other may reuse the existing underlayment and charge extra for anything found once the shingles are off.
A useful number, then, is not a national average. It is your roof, measured, priced with rates that apply where you live, with the scope written down.
What sets the price
Roof size. Quotes are usually built per roofing square, which is 100 sq ft of sloped surface. A 26-square roof and a 40-square roof are different jobs even if the houses look similar. Measure the sloped area, not the floor plan.
What has to come off. A second layer of shingles adds removal and disposal. So does a tear-off that reveals three layers where the seller said one.
What is underneath. Decking is the wildcard. Rot, soft spots or a board that will not hold a fastener has to be replaced, and the price per sheet is usually quoted separately. A quote that assumes no decking repair is not wrong, but it is incomplete.
Pitch and shape. Steep roofs are slower and riskier to work on. Hips, valleys, dormers and skylights add cuts and flashing, and they raise the waste allowance because more shingle ends up in the dumpster.
Material. Asphalt shingles, metal panels and tile are different products with different installation methods. The material line includes more than the visible covering: underlayment, starter strip, hip and ridge caps, drip edge, fasteners and ventilation all sit in the same part of the quote.
Access and height. A two-storey house with a narrow side yard and a garden to protect takes longer than a single-storey with a driveway beside it. Labour is charged for time, so access shows up in the price.
Local rules. Permits, inspections and code requirements differ by state and municipality. Ice and water shield, ventilation and fastener schedules are often specified by code or by the manufacturer’s instructions, and skipping them can void a warranty.
Why there is no national average here
Several sites publish a national cost range. We could not find a public dataset that measures installed residential roof replacement prices across the country, so we do not present one. A range built from marketing estimates or from a lead-generation form is not a measurement, and repeating it would make our pages look more authoritative than they are.
The cost calculator takes the opposite approach. It assembles a total from rates you enter, so the result reflects your local market and your actual scope. The starting rates on the page are labelled as assumptions, because that is what they are.
How a quote is usually built
Most contractors price in one of two ways.
The first is a price per square that includes labour and standard materials, with extras listed separately: decking, ridge vent, chimney flashing, skylight re-flashing, second layer removal.
The second is a line-item quote: materials, labour, disposal, permit and any allowances, each with its own figure.
Both can be fair. The line-item version is easier to check, and easier to compare against another quote, because you can see whether the two contractors are pricing the same work.
Doing the arithmetic yourself
A roof of 2,683 sq ft is 26.83 squares. Using the example rates on our calculator, which are assumptions rather than surveyed prices:
| Line | Arithmetic | Amount |
|---|---|---|
| Materials | 26.83 × $190 | $5,098 |
| Labour | 26.83 × $260 | $6,976 |
| Tear-off and disposal | 26.83 × $90 | $2,415 |
| Permit | flat | $450 |
| Other fixed costs | flat | $300 |
| Subtotal | $15,238 | |
| Contingency, 8% | $15,238 × 0.08 | $1,219 |
| Total | $16,457 |
That is about $613 per square. Change the rates to match a quote you have received and you can see which line is driving the difference. If one quote is $4,000 higher, the calculator will usually show whether that sits in labour, in decking, or in the contingency.
Comparing two quotes
Put both quotes beside each other and check the same items on each:
- Roof area in squares, and whether overhangs are included.
- Layers to be removed, and who pays for disposal.
- Decking: the allowance, the price per sheet, and who decides when a sheet is replaced.
- Underlayment type, and whether ice and water shield is included at the eaves and valleys.
- Starter strip, hip and ridge caps, drip edge, and their quantities.
- Ventilation: ridge vent, soffit vents, or none.
- Flashing at walls, chimneys and skylights.
- Permit: who pulls it and who pays.
- Warranty: product coverage and workmanship coverage, in writing.
- Payment schedule and start date.
A quote that is silent on decking is not necessarily cheaper. It may simply move the cost to a change order later.
Warning signs
The Federal Trade Commission lists tactics used by home improvement scammers. They include knocking on the door because they are “in the area”, claiming to have material left over from another job, pressing for an immediate decision, asking for full payment up front or cash only, and asking the homeowner to obtain the building permit.
None of those alone proves fraud. Together they describe a pattern worth walking away from. A contractor who is busy and reputable will still put the scope in writing and will not need an answer in the next hour.
Questions worth asking
Ask who will be on the roof, whether the crew is employed or subcontracted, and who is responsible for damage to landscaping. Ask what happens if the decking turns out to be worse than expected, and get the per-sheet price before work starts. Ask for the manufacturer’s warranty documents rather than a verbal summary.
Ask, too, how long the job will take and what weather would stop it. Roofing is weather-dependent, and a schedule that ignores rain is a schedule that will slip.
Common mistakes
Paying a large deposit before any material is delivered leaves you with little leverage. The FTC advises against paying in full before the work is finished.
Comparing only the totals hides scope differences. Two quotes can differ by thousands because one includes a tear-off and the other does not.
Forgetting ventilation is common. A new roof over an unventilated attic can trap moisture and shorten the life of the covering, and the fix is cheaper before the shingles go on.
Skipping the permit to save a few hundred dollars can cost more at resale, when an inspector or buyer asks who approved the work.
Safety
Roof work is dangerous. OSHA requires fall protection for workers in residential construction at six feet or more above a lower level. That rule applies to employers, not homeowners, but the hazard is the same for anyone who climbs up. Measurements from the ground, from a window, or from the attic are safer and usually accurate enough for planning.
Frequently asked questions
Is a bigger roof always more expensive?
Usually, because materials and labour are priced per square. The cost per square can fall slightly on a larger roof because the permit and other fixed costs are spread over more area.
Does a second layer of shingles save money?
It can reduce disposal cost, but it adds weight, can trap moisture, and makes the next replacement harder. Whether it is allowed depends on local code and the manufacturer’s instructions.
Should I pay a deposit?
A deposit for materials is normal. Paying the full amount before work begins is not. Keep payments tied to stages you can see.
Why do quotes vary so much between neighbouring towns?
Labour supply, permit fees, disposal charges and local code requirements all differ. Two towns twenty miles apart can have different costs for the same roof.