Guide

How many shingles do you need?

Bundles come from sloped area, a waste allowance and the coverage printed on the wrapper. The rounding is the easy part; choosing the coverage figure is where most orders go wrong.

Reviewed 21 Nov 2026 By the usroofwala editorial desk US customary units

Quick answer

Divide the sloped area, plus waste, by the coverage of one bundle, then round up. For a 2,400 sq ft roof with 10 percent waste and 32.8 sq ft per bundle, that is 2,640 ÷ 32.8 = 80.49, so you order 81 bundles.

Shingle orders go wrong for one of two reasons. Either the roof area is wrong, or the coverage per bundle is assumed rather than read from the wrapper. The division is simple once those two numbers are settled.

The calculation

bundles needed = roof area × (1 + waste ÷ 100) ÷ coverage per bundle
bundles to order = round up

Area is measured on the slope. Waste is your allowance for cuts and damaged pieces. Coverage is the square footage one bundle covers when installed.

Squares, bundles and coverage

A roofing square is 100 sq ft of roof surface. It is a unit of area, and it is how a lot of material is priced.

Asphalt shingles are commonly packed three bundles to a square. That is a packaging convention, and it is useful for rough mental arithmetic, but it does not tell you the installed coverage.

GAF’s installation instructions for Timberline HDZ state that three bundles, applied as directed, cover 98.4 sq ft. That works out to 32.8 sq ft per bundle on average. GAF does not publish a per-bundle figure, and the document covers several lines in the Timberline HDZ family, so treat 32.8 as an average and confirm it for your product.

The 33.33 sq ft figure that appears on retailer listings comes from dividing 100 by 3. It is arithmetic, not a coverage specification. On a 2,640 sq ft order the difference matters:

Basis Division Bundles ordered
3 bundles per 100 sq ft 26.4 squares × 3 = 79.2 80
32.8 sq ft per bundle 2,640 ÷ 32.8 = 80.49 81

One bundle short is not a disaster on a simple roof, because the crew will have offcuts. On a roof with valleys and dormers it can stop the job.

Bundle table

The table uses 32.8 sq ft per bundle, which is the GAF average described above. Rows show the unrounded result and the number to order.

Roof area 10% waste, before rounding 10% waste, order 15% waste, before rounding 15% waste, order
1,000 sq ft 33.54 34 35.06 36
1,500 sq ft 50.30 51 52.59 53
2,000 sq ft 67.07 68 70.12 71
2,400 sq ft 80.49 81 84.15 85
3,000 sq ft 100.61 101 105.18 106

If your bundle has a different coverage, divide by that number instead. A bundle covering 25 sq ft needs more bundles than one covering 33 sq ft for the same roof.

Choosing a waste allowance

Waste covers cuts at hips, valleys, ridges and edges, plus pieces damaged during handling. The usual starting points are 10 percent for a simple gable and 15 percent for a roof with more cuts.

Those figures are common practice, not measurements. A roof with several dormers, a turret or a lot of intersecting planes can need more. A plain rectangle with no penetrations may need less.

The cost of over-ordering a bundle is small. The cost of stopping a crew for one bundle is a day of labour, so when the shape is borderline, round up.

Do not forget the rest of the order

Field shingles are one line. A complete roof also needs:

  • Starter strip along the eaves and rakes.
  • Hip and ridge caps, which are often made from the same shingles or bought as a separate product.
  • Underlayment, which has its own coverage per roll.
  • Ice and water shield where required.
  • Drip edge in lineal feet.
  • Fasteners, specified by the manufacturer.
  • Ventilation: ridge vent, soffit vents, or both.

Each of these has its own coverage or length, and each is priced separately. A bundle count alone will not complete the order.

Rounding

Round up once, at the end. Rounding the area, then the squares, then the bundles compounds the error.

Calculator results use the unrounded division and then apply a ceiling, so 80.49 becomes 81 and an exact 100 stays 100.

Worked example

A 2,400 sq ft roof with a 10 percent waste allowance and 32.8 sq ft per bundle:

  • Waste: 2,400 × 0.10 = 240 sq ft.
  • Coverage needed: 2,400 + 240 = 2,640 sq ft.
  • Before rounding: 2,640 ÷ 32.8 = 80.49 bundles.
  • To order: 81 bundles.

The 81 bundles cover 2,656.8 sq ft, which is 16.8 sq ft more than needed.

Check before you order

Read the wrapper on the actual bundle you will receive. Product lines change, coverage varies between manufacturers, and a calculator cannot see the pallet in your supplier’s yard.

Ask the supplier whether the price is per bundle or per square. The two are easy to confuse on a quote, and the difference is a factor of about three.

If the roof is being installed by a contractor, ask who is responsible for the takeoff. A count you supply is a count you own if it comes up short.

Frequently asked questions

How many bundles are in a square?

For many asphalt shingles, three. GAF lists three bundles per square for Timberline HDZ, but its installation instructions give 98.4 sq ft of installed coverage for three bundles, so the effective coverage is 32.8 sq ft per bundle rather than 33.33.

Should I order 10 or 15 percent extra?

Ten percent suits a simple gable. Fifteen percent is safer on a roof with hips, valleys, dormers or several penetrations. Add more for unusually complex shapes.

Can I return leftover bundles?

That depends on the supplier and on whether the bundles are unopened and undamaged. Ask before ordering, and keep the receipt.

Does the calculator include ridge caps?

No. It counts field shingles only. Starter, caps, underlayment and fasteners are separate products.

Why is my contractor’s count different from mine?

Small differences come from rounding and from waste allowances. A large difference usually means a different coverage figure, a different area measurement, or extra material for a feature that is not in your calculation. Ask which number they used.

Run your own numbers

The arithmetic here is the same arithmetic the calculator uses, with your measurements instead of the example ones.

Open the shingle bundle calculator

Sources

Checked 21 Nov 2026. Links open in a new tab.

  1. GAF Timberline HDZ installation instructions, RESTL622-PDF-0423 (retailer-hosted copy)